Servos DS04-NFC 360 degré 4.8V/6V

Servos DS04-NFC 360 degré 4.8V/6V

Description:


The signal terminal needs to be input with one 50 HZ  square wave, then the duration of high level pulse, which is used to  control signal cycle, can control speed and forward/backward rotation as  well as stalling. The duration of high level corresponds to a speed.  When high level is 1ms~1.5ms, servo rotates forward(the rotate speed is  the fastest when it is 1ms, the higher the lower, servo will stop  rotating when reaching 1.5ms). When high level is 1.5 ~2ms, the servo  rotates backward(The servo stops rotating when reaching 1.5ms, when the  duration is closer to 2ms, the closer, the faster. The backward rotation  speed, the fastest when reaching 2ms)


This servo carries meso-position adjustment  potentiometer(it can only be seen by peeling off the outer cover and  circuit board). We can set high level pulse at 1.5ms to observe that  whether servo stops rotating. If it doesn’t stop rotating, we keep  adjusting the potentiometer until it does.

Features:

Applies to model airplane / Model  car / robot
Torque: 5.5kg/cm (at 4.8V)
Speed: 0.22sec/60°(at 4.8V)
Working voltage: 4.8v-6v
Temperature: 0℃-60℃
Current: < 1000mA
Weight: 38g
Dimensions: 40.8 x 20 x 39.5 mm


Package included:

1 x 360 Degree Continuous Rotation Servo Motor

Écrire une critique

Remarque: HTML n`est pas traduit!
    Mal           Bien
Captcha
  • : 58
  • Code produit: DS04-NFC
  • Disponibilité: En stock
  • $9.95