1. GND (power ground)
2. VCC (power supply is 3.3V)
3. CLK (clock line)
4. MOSI (data input)
5. RES (reset line)
6. DC (data / command selection line)
7. BLK (backlight)
8. MISO (data output)
Pin description:
If you want to save IO port, BLK
backlight can not be connected. The system has been designed to
illuminate the backlight even if it is not connected. If you need to
turn off the backlight, you need to connect BLK to low level or directly
to ground.
MISO is the output signal of the
screen. If you do not need to read the information of the screen, this
pin can be disconnected. A minimum of 4 IO ports are required to
operate.